Frequency
|
|
| Frequency Range |
200 KHz -810Mhz(1800MHz , 1800C) |
| Span |
20 Khz to 1 Ghz |
| Center Frequency |
0Hz to 810MHz |
| Marker Error |
+/- 1% Span
+/- 280 x Freq Ref Err
|
| R.B.W. |
300KHz, 10KHz,4KHz |
| RBW Accuracy |
+/- 10 % |
| RBW Selectivity 60dB / 3dB |
10:1, 4 Pole Filter |
|
Drift |
<50 Hz / Min., 30 Min warmup |
| Reference Oscillator |
Freq Ref Error: +/- 200 Hz @4 Mhz
|
| Video Bandwidths |
Fixed at each RBW |
Amplitude
|
|
| Measurment Range |
-120 dBm to -30 dBm |
|
Max. Safe Input Power (CW) |
+0 dBm( Internal Attenuator Limit) |
| Display Calibration |
2, 5, 10 and 15 dB / div |
| Display & Readout Power Accuracy |
Avg Err. +/-3.0 dB, +/-4.0 dB Max.
300 KHz RBW, 1 MHz to 1400MHz |
| Incremental Resolution |
+/- 1 dB |
| Frequency Response Flatness |
+/- 2 dB from 1MHz to 800MHz
3 to 6 dB roll off @ 810 MHz |
| Internal Attenuator Range |
20 dB in two steps, 10/20 |
| Spurious Free Dynamic Range |
60 dB @4 KHz RBW |
| Residual Responses |
< -90 dBm with input terminated, 0 dB attenuation. |
| 3rd Order Intercept |
-10 dBm (Preamp ON) |
Time Related Specs
|
|
| 1st LO Settling Time |
< 2000 µS |
|
Sweep Time |
Min: 200 msec . Max: > 5 min.
486 Based System @ 33 MHz |
| Video Digitizing Rate/ Resolution |
> 10Ksps, 8 Bits |
External Input Characteristics
|
|
| RF Input |
50 Ohm, Type F, female |
| RF Input VSWR |
< 1.5:1 , 0 dB attenuation
|
Other Specifications
|
|
| Power Requirement |
.1 amp @ 12 volts, 1 amp @5 Volt
|
| Weight |
<1 lbs(no internal battery)
|
| Size(WxHxD, Inches) |
3.75 x 1.00 x 13.75
|
| System Requirements |
IBM PC or compatible with VGA monitor, 1.4 MbB floppy drive, 2 MB Ram
, One Parrallel Port and DOS 4.0 or higher. A 386 processor or better is recommended. |
